Cable 101: Jacketing and Which is Best for Your Application

by | Dec 5, 2017 | Medical Connector | 0 comments

Whether you are producing a disposable medical device, a consumer charging cable, or a wire harness for a piece of capital equipment, you must connect the different components together—the exterior of all of those wires is the Jacket.

Before we discuss what the “Jacket” is, let establish the very basic anatomy of a wire. Within a “simple” wire you have, moving from inside to outside;

  1. Conductor
  2. Insulation
  3. Shielding
  4. JACKETING

What is the “Jacket”?

Simply put, the jacket provides protection to the internal components of a wire, as well as differentiation in the physical appearance of the wire.

What is the Jacket made of?         

There are two leading players in the wire jacketing game: thermoplastic vs thermoset. The most common wire jackets are produced using thermoplastics, while some specialty applications use thermosets.

Thermoplastics

  • Easy to manufacture
  • Ability to produce a wire that is lighter weight
  • Easily colored for identification purposes
  • electrically beneficial
  • Usually less expensive
  • Examples: PVC, polyethylene, polyurethane, polypropylene. Etc.

Thermoset

  • Used in situations with extreme exposure and pressure
  • Requires curing once extruded
  • Will not re-melt once extruded
  • Generally more expensive
  • Examples: rubber, neoprene and silicone to name a few

What to consider when considering a wire jacket:

  • What is the environment the wire will be used in? Does it need to be tough and abrasion resistant?
  • How flexible does the wire need to be?
  • What is the range of temperatures the wire will be exposed to?
  • What is the life expectancy of the wire?
  • How resistant does it need to be to various elements: Flame, Heat, Cold, Oil and other Chemicals, Light and Weather?

 

 

Depending on your answers to these questions and many others you’ll be able to determine if you need a thermoplastic or a thermoset. For example; both PVC and Rubber have excellent heat resistance, but when exposed to a flame rubber performs poor and PVC performs excellently.

You’re starting to wrap your head around jacketing a wire, when the next set of questions come up, or for more information about wire jacketing please contact ATL at…..

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *